TURNOUT DETAIL PARTS RANGE:

NOW INCLUDES: SCALE SWITCH STANDS, FROG SUPER-DETAIL KITS, POINTS SUPER-DETAIL KITS, THROW BAR SUPER-DETAIL KITS, JOINT BARS, NUT AND BOLT ENDS, RAIL CLAMPS,

NOTE: ALL THE PARTS ON THIS PAGE ARE DUAL-PURPOSE AND SUITABLE FOR BOTH HO and PROTO:87



 

 

PROTOTYPE EXAMPLE: SP STYLE SWITCH STAND AND THROW BAR DETAILS
(Note: SP rotates their switch stands to mount them on just a single Head Tie)


 

 

A SCALE MOLDED SWITCH STAND AND EXTRA DETAILS
With possibly workable Indicator, joint bars and rail braces.
Now also available as just the static switch stand only. See below in the products section



 

 

PROTOTYPE JOINT BAR ON A TURNOUT
(Also a Rail Size Transition Type)

 

 



 

MODEL RAIL JOINT BARS

We now offer Solid Nickel Silver chemically milled Bulk packs of low profile Joint Bars for code 55, 70 and 83 Rail (below). These will not protude and interfere with any type of HO wheel flanges. All are modeled as fitted on the rail, with the familiar alternate Bolt Head and Bolt Nut Ends showing.



NEW BULK PACKS OF FINELY ETCHED, LOW PROFILE, NICKEL SILVER, COSMETIC, JOINT BARS FOR HO



THE NEW LATEST, AMAZINGLY REALISTIC AND PROTOTYPICALLY ACCURATE BOLT/WASHER STRIPS FOR SUPER-DETAILING ALMOST EVERY TYPE OF FROG, INCLUDING COMMERCIAL TURNOUT FROGS, AND HAND-LAID TURNOUT FROGS

THESE ARE NOW AVAILABLE IN SINGLE SAMPLE PACKS AND NEW ECONOMICAL SIX-PACKS AS SHOWN BELOW.



FROG SUPER-DETAIL BOLT STRIP "SIX_PACK"

SIMILARLY WE NOW HAVE SIX-PACKS OF OUR VERY POPULAR POINTS AND THROW BAR SUPER-DETAILING SETS



POINTS AND THROWBAR SUPER_DETAIL "SIX_PACK"

THE "TPSW3" COMPONENT FEATURED IN THE "MODEL RAILROADER" HAS BEEN UPGRADED INTO THE TWO EVEN MORE ACCURATE, BUT ALSO MORE ECONOMICAL "FROG SUPER-DETAIL SET", AND "POINTS AND THROWBAR" SUPER DETAIL SETS" SHOWN ABOVE. THESE FIT ALL RAIL SIZES AND NOW SUPER-DETAIL BOTH THE POINTS AND THROWBAR OF ALMOST ANY TURNOUT, NEW OR OLD, COMMERCIAL OR HAND-LAID.

 



 

SCALE CAST MODEL HEAVY DUTY NUT AND BOLT ENDS

. These castings are ideal to add to the fixing points of heavily bolted parts of a turnout, such as the Guard Rail Spacing Blocks and Frog Filler Blocks. Supplied in packs of 5 castings as above - 20 Nut ends
Enough for one Turnout.

 

SCALE CAST GUARD RAIL CLAMPS
(Not Shown)

 


frog-sg-proto-300-300.jpg
Frogs HO101905 $4.95
point-proto-end-300-300.jpg
track-base-plastic-300-300.jpg
track-tools-300-300.jpg
Track Tools HO101920 $4.95
track-wiring-supplies-300-300.jpg
turnout-detail-2-300-300.jpg
Turnout Details HO101907 $1.25
turnout-base-sheet-fe-300-300.jpg
throwbar-kit-fe-300-300.jpg
turnout-base-fe-300-300.jpg
MB-50-300-300.jpg
Microbond Strong CA Adhesive102250 $8.95
Quantity