"INDUSTRIAL AVENUE"

REGULAR RAILROAD INDUSTRIAL IN PAVEMENT STREET TRACK AND TURNOUTS

THE MOST REALISTIC STREET AND INDUSTRY SWITCHING TRACK SYSTEM SUITABLE FOR HO, "00", "EM", PROTO:87 and "P4"

IDEAL FOR MODELING IN-STREET, PAVED YARD OR DOCKSIDE TRACKWORK

 

 



Virtually exact scale, Heavy RR Girder rail and Turnouts that can be used by most regular OO/HO RTR locomotives and freight cars

Shown here easily simply glued down directly to our recommended street base of 3/32" or 1/8" smooth ply, such as inexpensive "door skin" sheeting. Use of such a base thickness also allows easy connection and crossover to regular track at matching rail heights







 

The new turnout kits come in sizes #4, #5 or #6 and comprise all the necessary straight and pre-curved simulated girder rail, an accurate AAR style flat cast insert street frog together with a set of our AAR 11 ft street points.

  As well as turnouts, the Industrial trackage system includes straight rail sets and pre-curved rail sets of 18",16", 14" and 12" radii, together with short adapter rail sections to link the paved trackage to regular model RR track.


The INDUSTRIAL PAVED Street Track System is designed specifically for FINE QUALITY HO and 00 Layouts, where some street running and/or paved over yard or dockside situations exist. It can also be used in many situations for HOm, and even N.

It will operate with either 2-rail, or overhead, DC or DCC wiring. The unique scale appearance and narrow flange ways are made possible, by making HO/00 vehicles with properly set NMRA RP25 wheel sets run on their flange tips. This has now proven to be very practical and reliable, provided only that short wheel base locomotives are used on the sharper radii and switching speeds are kept moderate on the curved routes.

The INDUSTRIAL PAVED Street Track System comprises a set of precision preformed straight and curved, solid Nickel Silver "girder rail" sections, of a very low, flat profile, simulating just the visible very top of the railhead. These can be plastered flush to create realistic concreted yards or streets, or used in conjunction with our wide range of sheets of pre-textured street surfaces of matching height, to give the appearance of flush buried scale "girder rail".



 

The flat rails are merely glued to a convenient, flat street base, incredibly easily aligned end to end and electrically connected, using our alignment pin wire and tinned squares of flat wire. Power is supplied by flat wire strips. Track gauging is also simplified by using a spare truck to line up the second rail as it is fixed down. Finally finish, by the chosen method of applying the street surface.

 





 

Absolutely no complicated or skilled rail bending required! Accurately preformed curved sections are available to fit single or double track working. However, they are sufficiently flexible to adjust for installation as standard, narrow or even dual gauge configurations.

THERE WILL SHORTLY BE FREE DOWNLOADABLE TEMPLATES TO EASILY AND QUICKLY LAY THE COMMON INDUSTRIAL PAVED TRACK TURNOUTS AND RAIL.


paved-turnout-300-300.jpg
Paved Turnout Kit HO101980 $19.95
surface-sheets-300-300.jpg
paved-street-300-300.jpg
Paved Track HO Plain101961 $12.95
track-tools-300-300.jpg
Track Tools HO101920 $4.95
track-wiring-supplies-300-300.jpg