surface-sheets-300-300.jpg

3D Surface Texture Sheet


$7.95 101678
Quantity
More Details - 3D Surface Texture Sheet

 


3D TEXTURED MODEL WALL AND STREET SURFACES:

 Supplied as Full 12" by approx 8" x 0.020" molded styrene sheets.  Easy to sand and to cut with scissors or a craft knife. Easy to glue with plastic cement.  Easy to weather/paint with most model paints.

http://www.proto87.com/media/3D-brick-wall-swdiesel-800.jpg

AS REALISTIC AS LASER CUT PRODUCTS, BUT ONLY ABOUT 1/4 OF THE COST.

As well as using for street track paving, ideal for scratchbuilding or modifying model buildings, building flats, civil engineering retaining walls, bridges, tunnel mouths, etc,.

Unpainted examples of use for paved track.





Traditional Setts shown alongside a plain (matte) concrete strip



Modern Round Decorative stones



Modern concrete square tiled



Traditional worn rectangular Cobblestones



Red brick Bond (2 brick sizes)



Red Brick Bond inside the track mixed with Concrete Paving Slabs outside the track



Plain Red Brick (one size) custom cut and fitted to parallel the rails

As well as the surfaces above, there is a matte near black asphalt version of the plain concrete finish. The available street surfaces are also accurately scaled for HO with fine fine stone or brick detail and minor natural random blemishes.

Except as otherwise noted, these highly durable plastic surfaces are supplied as nominal approx. 8" by 12" sheets in a neutral beige/grey stone color which can be painted and weathered for an extremely realistic final finish.
Note that these fine surfaces are intended for use as needed for ultra track realism within the narrow confines of the loading gauge of the street trackage and median. The remainder of the street area can be finished traditionally and even more economically with painted wood, card or plaster as appropriate.

Further varieties of street surface may be introduced later.